8.0-RELEASE has no src/share/examples/isdn/ I suspect 7 doesnt support isdn either. *** 4.4-RELEASE/src/share/examples/isdn/FAQ Wed Nov 7 10:17:45 2001 --- gen/src/share/examples/isdn/FAQ Wed Nov 7 12:19:10 2001 *************** *** 41,46 **** --- 41,47 ---- 27. i4b_pci_attach: pci_map_port 1 failed! What does this mean ? 28. What is: i4b-L2 i4b_rxd_ack: ((N(R)-1)=35) != (UA=36) !!! 29. Why does isdnd take up 95% CPU time ? + 30: Which PBXs (=TK Anlagen) are compatible ? 1. How do I get started with synchronous PPP (sPPP) ? # *** 3.4-RELEASE/src/share/examples/isdn/FAQ Sun Mar 5 11:47:59 2000 # --- new/src/share/examples/isdn/FAQ Sun Mar 5 11:50:19 2000 # *************** # *** 34,39 **** # --- 34,40 ---- # 21. Help, isdn4bsd 0.82 fails to probe my Elsa PCC-16! # 22. How do i enable and configure userland PPP with i4b ? # 23. What is the procedure to install a new i4b on FreeBSD 3.x ? # + 27: Which PBXs (=TK Anlagen) are compatible ? # # # 1. How do I get started with synchronous PPP (sPPP) ? *** 3.4-RELEASE/src/share/examples/isdn/FAQ Sun Mar 5 11:47:59 2000 --- new/src/share/examples/isdn/FAQ Sun Mar 5 11:50:19 2000 *************** *** 935,937 **** --- 936,982 ---- (From: Luke Roberts ) + + + 30. Which PBXs (=TK Anlagen) are compatible ? + ================================================================================ + + Problems are not normally expected where both PBX & ISDN card plug straight + into the NTBA, or where the ISDN card plugs into a socket on the PBX, + if the socket is electrically just an extension from the NTBA. + Problems may occur on more expensive PBX's with internal S0 bus[es], that + provide internal switching. If the protocol implementation from the PBX + clashes with I4B, one may need to resort to the standards &/or the mail list, + to solve the problem. + PBXs we know of are listed below, if you know of behaviour of I4B with other + Complex PBXs with Internal S0 Bus, please email us: + - Simple PBXs with no Internal S0 Bus, Working OK: + - Emmerich Istec 1008 < Julian Stacey jhs@: + 8 Analogue ports (screwed not socket). No Socket for ISDN card. + /usr/ports/misc/estic to control it, I also have a newer estic port. + - Eumex 306 < Alexander Leidinger : + 4 S0 connectors, wired direct to NTBA. 4 analog ports + Only possible to use PBX-functions (e.g. internal calls) between + analog devices. The card is connected to the PBX. + - Siemens Gigaset 1054 isdn < "Martin Husemann" : + DECT and two analog lines. + Probably not produced any more (i.e. replaced by something cheaper). + - Simple PBXs with no Internal S0 Bus, Problematic.: - None known. + - Complex PBXs with Internal S0 Bus, Working OK: + - Ackermann Euracom 18x < hm@_ERASE_hcs.de (Hellmuth Michaelis): + More info at www.ackermann.de. I'm quite satisfied. + From: Gerhard Sittig Sat, 18 Mar 2000 + MaximaX for Linux, runs on X and just talks to a serial port + - Siemens HiCom 300 < Christian Wolf : + 16 internal S0 buses. (About 200 phones and 16 DECT phones connected). + PBX offers DSS-1 for its internal S0. + The PBX is currently connected to three PRI's (S2M) / 90 B-Channels. + I'm running i4b with a HiCom 300 from Siemens successfully since 1996 + (that was bisdn-0.96 :-) The HiCom and FreeBSD/i4b were upgraded + several times. + There are two minor problems with i4b-0.90.00: + - An error message by the kernel which fills up + the logs and the kernel-message-buffer (dmesg) (fix sent to hm@) + - Charging information is only provided by a display-information, + e.g. "[display: 0.24 DM]". So you can't set "unitlengthsrc = aocd". + - Complex PBXs with Internal S0 Bus, Problematic: None Known